Tip: Matrični
Proizvođač: Sinclair ZX Printer

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE!
SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE!
MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU!

Sinclair Spectrum Zx Printer stampac za racunare sa rolnom papira.

Model: Sinclair ZX Printer with Sinclair ZX Printer Silver Paper Thermal Roll
Made In UK

Retro stampac za ZX81 ali i ZX80 kompjutere sa termo rolnom papira za stampanje.

Potpuno ispravan i testiran.

Radna garancija 7 dana.

Opis:

The Sinclair ZX Printer is a spark printer which was produced by Sinclair Research for its ZX81 home computer. It was launched in 1981, with a recommended retail price of £49.95.

The ZX Printer used special 4-inch (100 mm) wide black paper which was supplied coated with a thin layer of aluminium. To mark the paper, one of the printer`s two styluses passed a current through a small area of the aluminium layer, causing the aluminium to evaporate and reveal the black under-surface. The printer`s horizontal resolution was the same as the ZX81`s video display, i. e. 256 dots (pixels) or 32 characters (using the standard character definition).

The ZX Printer was also compatible with the earlier ZX80 computer (when fitted with the 8kB ROM upgrade) and the later ZX Spectrum, and plugged directly into the expansion bus connector via a short cable. The expansion bus was duplicated on the outside of the printer`s connector, allowing other peripherals to be connected concurrently. The printer drew its power directly from the expansion bus, and was sold with a larger (1-2A) power supply for the ZX81 to accommodate the additional power drain. [1] The Spectrum`s user manual noted that this was not needed for the Spectrum as its default 1.1A power supply was sufficient.

The ZX Printer was launched in 1981 by Sinclair for £49.95 with a resolution of 32 characters or 256 pixels and was compatible with the ZX81 and ZX Spectrum computers.

The ZX Printer used 4 inch (100 mm) aluminium coated paper.