EAN/UPC: Ostalo
Tip: LAN
Proizvođač: Phihong

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE!
SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE!
MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU!

Phihong POE spliter adapter 30V 0.5A ORIGINAL jacine 15W.

Model: PSA15M-300 (SM)
P/N: N000900L002A
Switching power supply 10/100Mbit Compatibile / CAMBIUM PoE Power Supply Fast Ethernet

Power Over Ethernet (ePMP) adapter za napajanje IP kamera, IP telefona ili WAP mrežnih uređaja.

Dolazi sa naponskim kablom.

Potpuno ispravan i testiran.

Radna garancija 30 dana.

Opis:

The N000900L001A POE power supply can be used where 1000BaseT operation is necessary. Software enhancements to the PMP 450 product recently enabled the use of the gigabit Ethernet port on the PMP 450 AP. In order for the port to properly inject power and negotiate a 1000BaseT connection, this injector must be used. This is only needed in the case where the AP is operating at 8x (256QAM capacity) and the duty cycle is set above 80%, which could result in traffic throughput greater than 100 Mbps in a given direction.

Each ePMP Radio requires a power supply to generate the supply voltage from the external DC source and inject the voltage into the radio. The power supply connects to the radio via Cat 5e cable with RJ45 connectors.

The radio comes with a 30V Power supply which supports 10/100 Mbps Ethernet operation on the Cat 5e cable. The radio supports an input voltage range of 24 – 30 V. The radio modules can also be powered by any of the power supply modules that provide power for the PMP100 and PMP4X0 Subscriber Modules (ACPSSW-09B, -10B, -11B, -12C, -13B, -14V).