pregleda

2 x serial+1x parallel za pci-e(MosChip MCS9901CV)

Stara cena

3.000

din
-10%
Cena:
2.700 din
Stanje: Polovan bez oštećenja
Garancija: Ne
Isporuka: CC paket (Pošta)
Post Express
Lično preuzimanje
Plaćanje: Tekući račun (pre slanja)
PostNet (pre slanja)
Lično
Grad: Ub,
Ub
Prodavac

G.M (6776)

100% pozitivnih ocena

Pozitivne: 11149

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Konektori: 2 x serial+1x parallel
Tip: Interni
Povezivanje: PCIe

Polovan ispravan 2 x serial+1x parallel ,kontroler za pci-e slot (MosChip MCS9901CV).
Proban pod windowsom 7(vidi sliku).
Sa neta:nput:
• PCI-Express 1.1 interface compatible with PCI-Express 1.0a / 2.0 / 2.1 / 3.0.
• Number of 1-Lane (x1) lines compatible with x1 / x4 / x8 / x16 PCIe slots.
• The bandwidth of 1-Lane PCI-Express 1.1 bus 2.5 Gb/s.

Output serial ports:
• 2x serial RS-232 port with DB9 male connectors, both ports are placed on the card’s blanking plug.
• Maximum transmission rate of used RS232 drivers up to 250 kBd.
• Compatible with 16C550 / Extended 16C550 / 16C950 UART.

Output parallel port:
• 1x parallel IEEE 1284 port with a DB25 female connector, the port is located on an independent blanking plug and connected with the card via cable.
• Transmission rate up to 1.5 MB/s.
• SPP/EPP/ECP/Nibble/Byte compatible.

Other features:
• Plug and Play Support - automatic selection of IRQ and I/O address.
• Re-Map IO Address Support - COM and LPT port address setting (this feature is supported only in DOS).
• 256-Byte transmit & receive FIFO buffer for each port.
• Adjustable flow control Xon/Xoff, hardware or none.
• Adjustable word length 4, 5, 6, 7 or 8 bits.
• Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits.
• Supports TXD, RXD, RTS, CTS, DTR, DCD, DSR, and RI serial signals.
• 9-bit data transmission support.
• Supports connecting parallel devices such as printers, plotters, hardware keys or EPROM programmers.
• Supports connecting serial devices such as ATMs, cash registers, barcode readers, CNC machines, tablets, POSs or PDAs.
• ASIX (formerly MOSChip) MCS9901CV-CC chipset is used.

Supported operating systems:
• MS Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit Windows OS versions), Linux with kernel 2.6.11 and above, MS DOS 6.22.

Uplata pa slanje.Moguce slanje pouzecem clanovima bez negativnih ocena i minimum 30 pozitivnih po mojoj proceni.Ne saljem u inostranstvo.Moguce licno preuzimanje.Postarinu placa kupac. Ne odgovaram za zagubljenje i stetu nanetu u transportu.Trudim se da predmet sto bolje zapakujem.Zamolio bih kupce koji uplacuju na moj racun u banci da naznace ko je uplatio novac.Moguce placanje postnetom.Kontakt sa kupcima iskljucivo putem Limundo/Kupindo porukama.Pogledajte i moje ostale aukcije http://www.kupindo.com/Clan/G.M/SpisakPredmeta.U slucaju opravdane reklamacije vi placate postarinu.Ne prihvatam reklamacije tipa: ja se ne razumem u to ,rekli mi u servisu da moze i slicno.

Predmet: 79371805
Polovan ispravan 2 x serial+1x parallel ,kontroler za pci-e slot (MosChip MCS9901CV).
Proban pod windowsom 7(vidi sliku).
Sa neta:nput:
• PCI-Express 1.1 interface compatible with PCI-Express 1.0a / 2.0 / 2.1 / 3.0.
• Number of 1-Lane (x1) lines compatible with x1 / x4 / x8 / x16 PCIe slots.
• The bandwidth of 1-Lane PCI-Express 1.1 bus 2.5 Gb/s.

Output serial ports:
• 2x serial RS-232 port with DB9 male connectors, both ports are placed on the card’s blanking plug.
• Maximum transmission rate of used RS232 drivers up to 250 kBd.
• Compatible with 16C550 / Extended 16C550 / 16C950 UART.

Output parallel port:
• 1x parallel IEEE 1284 port with a DB25 female connector, the port is located on an independent blanking plug and connected with the card via cable.
• Transmission rate up to 1.5 MB/s.
• SPP/EPP/ECP/Nibble/Byte compatible.

Other features:
• Plug and Play Support - automatic selection of IRQ and I/O address.
• Re-Map IO Address Support - COM and LPT port address setting (this feature is supported only in DOS).
• 256-Byte transmit & receive FIFO buffer for each port.
• Adjustable flow control Xon/Xoff, hardware or none.
• Adjustable word length 4, 5, 6, 7 or 8 bits.
• Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits.
• Supports TXD, RXD, RTS, CTS, DTR, DCD, DSR, and RI serial signals.
• 9-bit data transmission support.
• Supports connecting parallel devices such as printers, plotters, hardware keys or EPROM programmers.
• Supports connecting serial devices such as ATMs, cash registers, barcode readers, CNC machines, tablets, POSs or PDAs.
• ASIX (formerly MOSChip) MCS9901CV-CC chipset is used.

Supported operating systems:
• MS Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit Windows OS versions), Linux with kernel 2.6.11 and above, MS DOS 6.22. 79371805 2 x serial+1x parallel za pci-e(MosChip MCS9901CV)

LimundoGrad d.o.o.
Vladimira Popovića 6, 11070 Novi Beograd, Srbija, 011 404 78 10

MB: 20083301
PIB: 104085073

Google play App Store Huawei App Gallery

© 2005 - 2025 LimundoGrad d.o.o

LimundoGrad koristi kolačiće u statističke i marketinške svrhe. Nastavkom korišćenja sajta smatramo da ste pristali na upotrebu kolačića. Više informacija.