pregleda

Arduino audio MP3 player shield compatible


Cena:
2.170 din
Stanje: Nekorišćen
Garancija: Ne
Isporuka: BEX
Plaćanje: Pouzećem
Grad: Beograd-Zemun,
Beograd-Zemun
Prodavac

electronic.center (1304)

92,24% pozitivnih ocena

Pozitivne: 2158

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Proizvedeno u : Aziji

This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont` need need to hook up with jumpers, it`s becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.



With the TF card slot on the other side of the board, you can play mp3 files from TF card using this breakout. It is easily to drop it in your project or make a mp3 player using your Arduino or other microcontroller. Features Can play a variety of music formats, support for OGG encoding real-time recording SPI interface, the control signal lines are led out A headphone and stereo output A microphone for recording A line_in input interface Power indicator 3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current A single power supply: +5 VDC 12.288 Mhz crystal TF cart slot.



Can play a variety of music formats, support for OGG encoding real-time recording

SPI interface, the control signal lines are led out

A headphone and stereo output

A microphone for recording

A line_in input interface

Power indicator

3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current

A single power supply: +5 VDC

12.288 Mhz crystal

TF card slot

Decodes formats

Ogg Vorbis

MP3 = MPEG 1 & 2 audio layer III (CBR+VBR+ABR)

MP1 & MP2 = MPEG 1 & 2 audio layers I & II optional

MPEG4 / 2 AAC-LC(+PNS), HE-AAC v2 (Level 3) (SBR + PS)

WMA4.0/4.1/7/8/9 all profiles (5-384 kbps)

FLAC lossless audio with software plugin (upto 24 bits, 48 kHz)

WAV (PCM + IMA ADPCM)

General MIDI 1 / SP-MIDI format 0

Encodes formats from mic/line

Ogg Vorbis with software plugin

IMA ADPCM

16-bit PCM

- Svi uređaji su nekorišćeni i testirani su pre slanja; dajemo radnu garanciju da stižu u funkcionalnom stanju.
- Rok za reklamacije je 7 dana od dana preuzimanja robe.
- Sva komunikacija sa kupcima obavlja se isključivo putem Kupindo/Limundo poruka, izuzev u situacijama kada je neophodan i telefonski kontakt.
- Isporuka robe vrši se:
* Kurirskom službom POST EXPRESS- pouzećem. Vrednost robe i troškove poštarine (oko 190 dinara) i transfera novca (oko 50 dinara) plaćate kuriru po preuzimanju pošiljke,
* Kurirskom službom POST EXPRESS, uz avansnu uplatu vrednosti robe na tekući račun. U ovom slučaju, potrebno je izvršiti avansnu uplatu vrednosti robe i troškova poštarine (150 dinara) na tekući račun,
* POŠTOM, kao preporučena pošiljka. U ovom slučaju, potrebno je izvršiti avansnu uplatu vrednosti robe i troškova poštarine (80 dinara) na tekući račun,
* Broj tekućeg računa na koji možete izvršiti uplatu je:160-5100100460990-94.
- Nakon izvršene kupovine neophodno je da kupac izvrši potvrdu kupovine i svojih podataka putem poruke u roku predviđenom Kupindo/Limundo pravilnikom. Ukoliko u propisanom roku ne dobijemo potvrdu, smatra se da je kupac odustao od kupovine,
- Svi predmeti se šalju najkasnije 24 časa nakon dobijene potvrde, osim u izuzetnim situacijama,
- Lično preuzimanje robe NIJE MOGUĆE.
- Stalni kupci ostvaruju pravo na popuste pri kupovini.

Predmet: 79424289
This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont` need need to hook up with jumpers, it`s becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.



With the TF card slot on the other side of the board, you can play mp3 files from TF card using this breakout. It is easily to drop it in your project or make a mp3 player using your Arduino or other microcontroller. Features Can play a variety of music formats, support for OGG encoding real-time recording SPI interface, the control signal lines are led out A headphone and stereo output A microphone for recording A line_in input interface Power indicator 3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current A single power supply: +5 VDC 12.288 Mhz crystal TF cart slot.



Can play a variety of music formats, support for OGG encoding real-time recording

SPI interface, the control signal lines are led out

A headphone and stereo output

A microphone for recording

A line_in input interface

Power indicator

3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current

A single power supply: +5 VDC

12.288 Mhz crystal

TF card slot

Decodes formats

Ogg Vorbis

MP3 = MPEG 1 & 2 audio layer III (CBR+VBR+ABR)

MP1 & MP2 = MPEG 1 & 2 audio layers I & II optional

MPEG4 / 2 AAC-LC(+PNS), HE-AAC v2 (Level 3) (SBR + PS)

WMA4.0/4.1/7/8/9 all profiles (5-384 kbps)

FLAC lossless audio with software plugin (upto 24 bits, 48 kHz)

WAV (PCM + IMA ADPCM)

General MIDI 1 / SP-MIDI format 0

Encodes formats from mic/line

Ogg Vorbis with software plugin

IMA ADPCM

16-bit PCM
79424289 Arduino audio MP3 player shield compatible

LimundoGrad koristi kolačiće u statističke i marketinške svrhe. Nastavkom korišćenja sajta smatramo da ste pristali na upotrebu kolačića. Više informacija.