Proizvedeno u : Aziji

Description:
4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes.
Links to tutorials and libraries: https: // instructables. com/id/Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https: //github. com/aguegu/ardulibs/tree/master/hx711
Works for raspberry pi
The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module
Two selectable differential input channels

Technical Parameters
Range: 0-10KG
Output sensitivity: 1.0±0.1mV/V
Zero output: ±0.1mV/V
Nonlinear: 0.05% F. S
Lag: 0.05% F. S
Repeatability: 0.05% F. S
Creep: 0.05% F. S/3min
Output impedance: 1000±5% ohms
Zero temperature drift: 0.05% F. S/10° C
Temperature sensitivity drift: 0.05% F. S/10° C
Load cell size: 81*13.5*13.5mm / 3.18*0.53*0.53in

Lead Cable
Motivation is positive: red
Incentive negative: green
Signal is positive: black
signal Negative : white