Proizvedeno u : Aziji

Senzor protoka vode - merač - protokomer 10-200 L/min za arduino i slicne sisteme.

Karakteristike:
- Radni napon: DC 5~24 V
- Maksimalna struja: 15 mA (DC 5V)
- Navoj: 2" (dva cola, tj oko 60mm prečnika)
- Model: YF-DN50
- Maksimalni pritisak vode: 1.75 Mpa (17,5 bar-a)
- Maksimalna temperatura vode: 80 stepeni (po deklaraciji)
- Vlažnost vazduha: 25~95 %RH (bez leda)
- Radna temperatura: -25~80 ℃
- Dimenzije: 92 x 59 mm

Povezivanje: crvena(+), crna(-), žuta (impulsni izlaz)

Na izlazu se pojavljuje povorka impulsa zavisno od protoka, više impulsa u minutu.
Broj impulsa (frekvencija) = 0.2 x Q
Q - protok u litrima u minutu (5L/min=1Hz; 10L/min=2Hz; ...)

------------------------------------------------------------

Sensor:Hall effect
Interface Type: 2` interface (2 inch tubing)
Flow accuracy range: 10-200L per minute
Lowest rated working voltage: DC 5V-24V
Maximum operating current: 15 mA (DC 5V)
Operating voltage range: DC 5 ~ 18 V
Load capacity: ≤10 mA (DC 5V)
Operating temperature range: ≤80°C
Operating humidity range: 35% ~ 90% RH (no condensation state)
Allow withstand water pressure: Storage temperature: -25 ~ + 80°C
Save Humidity: 25% ~ 95% RH
Production process: Integrated
Output high pulse:> DC 4.5 V (input voltage DC 5 V)
Output pulse low: The accuracy of flow - pulse output: 10 ~ 200L / min ± 3%
Output pulse duty cycle: 50 ± 10%
Output Rise Time: 0.04μS
Output Fall Time: 0.18μS
Flow - Level Test pulse frequency pulse characteristics: (Hz) = [0.2 * Q] ± 3% (proficiency tests) (Q is flow L / min)
Dimension:92 x 59mm/3.62 x 2.32`(L x Dia)
Weight:200g