pregleda

4-20mA to 0-3.3V/5V/10V strujno/naponski konverter


Cena:
600 din
Želi ovaj predmet: 2
Stanje: Nekorišćen
Garancija: Ne
Isporuka: Pošta
Post Express
Lično preuzimanje
Plaćanje: Tekući račun (pre slanja)
Pouzećem
Lično
Grad: Vršac,
Vršac
Prodavac

djuka76 (1192)

100% pozitivnih ocena

Pozitivne: 2168

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Proizvedeno u : Aziji

P12
Introduction:

1.Power Supply Voltage: 7-36V dim. 42mm x 25.2mm

2.After power on, D2 lamp should be on; if not, please check the connection. The board hasreverse connection protection function.

3.When the input current is the minimum (0mA or 4mA), please adjust the ZERO potentiometer to let VOUT output be the minimum (0.0V or other voltage)

4.When the input current is the maximum (20mA), please adjust the SPAN potentiometer to let VOUT be the maximum (3.3V or 5V, 10V; when the input is 4-20mA, output minimum is 2.5V)

Adjustment Range:

4-20mA:
1.0-2.5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
2.0-3.3V: J1 1,2 pin are disconnected; 3, 4 pin are disconnected
3.0-5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
4.0-10V: J1 1,2 pin are short circuit connected; 3, 4 pin are disconnected

0-20mA:
1.0-3.3V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
2.0-5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
3.0-10V: J1 1,2 pin are short circuit connected; 3, 4 pin are disconnected

VAŽNO!!!
1.ZA SLANJE PREPORUČENOG PISMA I CC POŠILJKE(PAKET)POTREBNO JE UNAPRED UPLATITI NOVAC!
2.NE ŠALJEM U INOSTRANSTVO!
3.NA KOSOVO I METOHIJU ŠALJEM SAMO POSTEXPESS-OM!
4.ZAMOLIO BIH POTENCIJALNE KUPCE DA PRE OBAVLJENE KUPOVINE BUDU SIGURNI DA IM PREDMET TREBA I DA ĆE GA PLATITI.ZBOG POVRAĆAJA PROVIZIJE,MORAĆU DA DAJEM NEGATIVNE OCENE!
5.UKOLIKO ČLAN KUPINDA IMA MANJE OD 10 POZITIVNIH OCENA OBAVEZNA JE UPLATA PRE SLANJA ROBE.
6.UKOLIKO ČLAN KUPINDA IMA NEGATIVNE OCENE OBAVEZNA JE UPLATA PRE SLANJA ROBE.

Predmet: 48200325
P12
Introduction:

1.Power Supply Voltage: 7-36V dim. 42mm x 25.2mm

2.After power on, D2 lamp should be on; if not, please check the connection. The board hasreverse connection protection function.

3.When the input current is the minimum (0mA or 4mA), please adjust the ZERO potentiometer to let VOUT output be the minimum (0.0V or other voltage)

4.When the input current is the maximum (20mA), please adjust the SPAN potentiometer to let VOUT be the maximum (3.3V or 5V, 10V; when the input is 4-20mA, output minimum is 2.5V)

Adjustment Range:

4-20mA:
1.0-2.5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
2.0-3.3V: J1 1,2 pin are disconnected; 3, 4 pin are disconnected
3.0-5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
4.0-10V: J1 1,2 pin are short circuit connected; 3, 4 pin are disconnected

0-20mA:
1.0-3.3V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
2.0-5V: J1 1,2 pin are short circuit connected; 3, 4 pin are short circuit connected
3.0-10V: J1 1,2 pin are short circuit connected; 3, 4 pin are disconnected
48200325 4-20mA to 0-3.3V/5V/10V strujno/naponski konverter

LimundoGrad koristi kolačiće u statističke i marketinške svrhe. Nastavkom korišćenja sajta smatramo da ste pristali na upotrebu kolačića. Više informacija.