Proizvedeno u : Aziji

P17
Feature:

Size:6.0cm*3.4cm*1.2cm

Working Volatge:DC5V-36V

Working temperature:-40℃~85℃

Output power:400W

Output current:15A

Trigger Signal:High Level (DC3.0V-24V)

Service Life:unlimited swith

Mearsurement range:0.1s-999min (continuously adjustable)

Application:
Support PWM Input to control speed of electric motor and brightness of light
Take control of high-power equipments, electric motors, lamps, DC Motor, Micro Pumps,etc in the output end.

Note:
The output voltage is same with input voltage (DC 5V-36V)
Please don`t connect `DC - ` with `Load -`, or the load end is always powered on.

Operating Mode:

P1 Mode: After the signal is triggered ，the relay breakovers OP, then breaks off. Operations as following in OP time:
P1.1：The signal triggers again in valid.
P1.2：The signal triggers again to time.
P1.3：The signal triggers again and the relay breaks off, stop timing.

P2 Mode：Giving a triggered signal, the relay breakover OP time after breaking off CL time. After finishing time, the relay will stop working.

P3 Mode:
P3.1：Giving a triggered signal, the relay breakover OP time after breaking off CL time. The relay will Circulate this process and you can set up LOP.

P3.2：No need to trigger signal after powered on.The reply breakover OP time, and break off CL time.You can set up LOP.


How to choose measurement range：

Press Stop quickly after setting datas to choose measurement range.

XXX. The decimal point is in the end Measurement range：1 second-999 seconds
XX.X The decimal point is in the ten Measurement range：0.1 second-99.9 seconds
X.X.X. All the decimal points show Measurement range：1 minute-999 minutes

Sleep Mode：

C-P Sleep Mode：The numerating tube will display off if there`s no operation in 5 mins.
O-d Normal Mode：The numerating tube is alawys on display.Press Stop for 2 seconds then loosen to switch from C-P to O-D.

Package List:

1pcs 12V 24V Dual MOS Time-delay Switch Electric Board Replace Reply Delay Module