Funkcije: AUX, Bluetooth , CD
Proizvođač: JVC

novo

CEA-2006 Compliant Yes
RMS Power Output 20 watts
Peak Output 50 watts
RMS Power Bandwidth 40-20kHz
Preamp Outputs 2-channel
Sub Preamp Outputs No
Switchable Rear Preamp Outputs Yes
Preamp Voltage 2.5 volts
Display Color White
Key Button Color Red/blue
EQ Bands 3
Wireless Remote Yes
Steering Wheel Control Compatible No
Parts Warranty 1 Year
Labor Warranty 1 Year
Expandability
AUX Input Front and Optional Rear
USB Input No
Memory Card Slot No
Bluetooth Compatible Built-in
Satellite Radio Ready Both
HD Radio Optional
Navigation No
iPod Compatibility
Full size ---
Nano ---
Touch ---
Mini ---
iPhone ---
Tuner
FM Sensitivity 11.3 dBf
European Tuning Yes
Seek/Scan Seek
Radio Data System No
Product Research
What`s in the box?
Download owner`s manual

AM/FM/CD receiver with 15-amp ATC fuse inserted into chassis
Face
Sleeve
Trim Ring
Hard plastic face case
Wiring harness
Wireless remote control (RM-RK50)
CR2025 Lithium battery
2 Radio removal tools
Mounting bolt (M5 x 13/16`)
Flat washer
Hex nut
Rubber bushing
Face fixing screw
Instructions (English/Spanish/French)
Installation/Connection Manual (English/Spanish/French)
USA Product Registration Card
USA Warranty sheet
Canada Warranty card
Bluetooth Information note
`Caution` note attached to harness
Our Product Research Team
At Crutchfield, you`ll get detailed, accurate information that`s hard to find elsewhere. That`s because we have our own in-house Product Research team — they open the box, verify contents, check the owner`s manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Features
Built-In Bluetooth
External Device Controls

Features
MOS-FET Amplifier: The JVC KD-BT11 features a MOS-FET amplifier that is CEA-2006 compliant and rated at 20 watts RMS x 4 channels in 4-ohm and 1% THD+N with a signal to noise ratio of 80 dBA.

MP3/WMA Playback: The KD-BT11 can play MP3/WMA files that have been recorded on CD-R and CD-RW discs. The disc must be recorded in one of the following formats: ISO 9660 Level 1/Level 2, Joliet, Romeo or Windows long file. You can directly access folders numbered 01-12 (they must be assigned two-digit numbers when recorded). Each disc can have a maximum of 8 folder hierarchies, 200 folders, and 512 files on a disc. The unit also supports IDTag3 (version 1.0, 1.1, 2.2, 2.3 or 2.4) for album and artist information from MP3 or WMA files. The unit can recognize file and folder names from 12 characters to 128 characters depending on the disc format.

24 Bit D/A Converter: The JVC KD-BT11 utilizes a 24-bit digital to analog converter for superior CD sound quality.

Preferred Setting Mode: By activating the Preferred Setting Mode (PSM), you can set the clock, choose the time zone and daylight saving time, select the dimmer mode, select the external component type (changer or line input), turn on/off ID3 Tag display, switch between US standard and European tuning spacing, set the Amplifier Gain control (high/low), and several other operational settings.

Intelligent Equalizer (i-EQ): The KD-BT11 has a 3-band parametric EQ with manually adjustable low (60 Hz, 80 Hz, 100 Hz, or 120 Hz), midrange (500 Hz, 1 kHz, 1.5 kHz or 2.5 kHz), and high frequency (10 kHz, 12.5 kHz, 15 kHz or 17.5kHz) settings and bandwidth settings (0.5Q, 0.75Q, 1.0Q, 1.25Q, 1.5Q, or 2.0Q). The settings for each EQ band varies from -6 to +6 dB. In addition, this unit also has six selectable preset sound mode combinations. Each of the sound modes may be adjusted to your preference and stored in one of three user memories. The preset Intelligent EQ modes are:

Sound Modes Preset Values
Low Mid High
Level Freq. Q Level Freq. Q Level Freq. Q
User Flat 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz Fixed
Rock +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz Fixed
Classic +01 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz Fixed
Pop +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz Fixed
Hip Hop +04 60 Hz Q1.0 -02 1 kHz Q1.0 +01 10 kHz Fixed
Jazz +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz Fixed
Loud (Loudness): This feature boosts low and high frequencies to produce a well-balanced sound at a low volume level. You can turn this feature on or off.

Amplifier Gain Control: When you are using the KD-BT11 with factory speakers (or those rated to less than 50 watts peak), the Amplifier Gain Control can limit the amount of power being sent to those speakers. When the Amp Gain Control is set to `low,` the volume control ranges from 0 (minimum) to 30 (maximum). When using speakers rated higher than 50 watts peak, you can set the Amp Gain Control to `high,` and the volume control will range from 0 to 50.

Title Assignment: The KD-BT11 allows you to assign titles to 30 AM/FM station frequencies using a maximum of 8 characters for each title.

Direct Track Access: You can directly access CD tracks 1-12 by pressing the station preset buttons. If a preset button is pressed for less than 1 second, the track corresponding to the number on the preset button is selected (for tracks 1-6). When a preset button is pressed for more than 1 second, the track corresponding to the number above the preset button is accessed (for tracks 7-12).

Preamp Output Mode: In the PSM menu, you can set the rear preamp outputs for connecting rear speakers (through an external amplifier) or for connecting a subwoofer (through an external amplifier). When set for rear speakers, the rear outputs operate with the unit`s fader control. When set for subwoofer, the outputs are non-fading, and you can set the cutoff frequency of the low pass filter at 90Hz, 135Hz, or 180Hz. The subwoofer level can be set between 0 and 8. You can also adjust the phase of the subwoofer preamp output to 180-degrees or 0-degrees.

Source Level: You can adjust the volume level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. You can adjust the volume level of each source from -5 to+5.

Front Panel Auxiliary Input: A front panel stereo minijack is provided to allow the connection of a portable audio source. Just connect your portable cassette, MD or MP3 player to this unit, and you can listen to the audio from the portable player through the speakers in your mobile audio system.

Compatibility with Optional Input Adapter: An optional JVC Line Input Adapter (item # 105KSU57) or Aux Input Adapter (item # 105KSU58) may be used to provide an auxiliary input on this unit. This feature allows you to connect a portable audio player, such as a portable MP3 player, to this unit as an additional audio source. The adapter connects to the CD changer input on this unit. When the adapter is connected to this unit, a CD changer cannot be connected.

Clock Display: While playing a CD, you can switch between the clock display and the CD elapsed time display (the track number always appears). When you press the Display button during power off, the unit will turn on, display the clock for 5 seconds, then shut off. This can be done with the ignition on or off. In the PSM menu, the clock can be set to display with the unit on or off, only turning off when the ignition is turned off (`keyed` operation).

Display/Button Illumination Dimmer: The display and button illumination dimmer can be set to Off (normal brightness at all times), On (display and button illumination is always dimmed) or Auto (dims the display and button illumination when you turn on the vehicle`s headlights).

Disc Protection: If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time until you close the fold-down face)

Disc Resume: If you change the source, playback also stops (without ejecting the disc). Next time you select CD for the playback source, the disc will start from where it has been stopped previously.

Detachable Face: The unit features a detachable face to deter theft and comes supplied with a hard plastic face case.

Wireless Remote Control: The KD-BT11 comes supplied with a wireless remote control (RM-RK50). The remote contains Power, Attenuator, Sound, Source, Tracking and Volume functions.

Built-In Bluetooth
Built-In Bluetooth Wireless Technology: The JVC KD-BT11 supports the following Bluetooth Profiles - HFP (Hands-Free Profile), A2DP (Advanced Audi Distribution Profile), AVRCP (Audio/Video Remote Control Profile), and OPP (Object Push Profile). Bluetooth is a short-range wireless radio communication technology for mobile devices such as your cell-phone. Bluetooth devices can be connected without cables for communication between each other. The JVC KD-BT11 features a built-in Bluetooth receiver along with a built-in microphone which allows you to make and receive cellular phone calls through your Bluetooth enabled phone, or listen to a Bluetooth audio device via the KD-BT11`s controls and your vehicle`s audio system. You can register up to 5 Bluetooth devices to this unit, however, only one unit of each type can be used at a time. You can operate the following Bluetooth features through this unit.

Making a call: You can make a call by entering a phone number from your JVC receiver`s Dial Menu.
Calling from phonebook: You can call a number from the phone-book in your connected cellular phone using your JVC head-unit; before using this function, transfer the phone-book memory of your cellular phone to this unit.
Calling by voice command: If your cellular phone is equipped with the voice recognition system, you can make a call by your voice using the supplied microphone.
Calling from call histories: The head-unit has three kinds of call histories - redial, missed calls, and received calls. You can make a call using these call histories through your JVC head-unit.
Call Waiting: If your cellular phone is equipped with the call waiting function, you can put the current call on hold and answer t