EAN/UPC: Ostalo
Proizvođač: Ostalo
Tip: CPU

Odlican kuler za Intel i AMD procesore sa heat pipe cevima.

Marke Arctic Cooling model Freezer 7 X u potpunosti ispravan i testiran.



Za Intel 1851, 1700, 1200, 115X procesore kao i za AMD AM4 i AM5 procesore.



A Worthy Freezer 7 Pro Successor: Better Price – Better Performance

The ARCTIC Freezer 7 X is a compact CPU cooler with one 100 mm fan. It is multi-compatible with common Intel® and AMD® sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC has been able to significantly improve the cooling performance of Freezer 7 X.



Longer Lifespan Thanks to its Low Coil Temperature

The Freezer 7 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X.



More Efficient and Whisper Quiet

In addition to operating more quietly, even at maximum speed, the Freezer 7 X built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X to run at a whisper-quiet 0.3 sone when at maximum speed.



P-Fan for Increased Performance

Inspired by the P-series, the fan of the Freezer 7 X benefits from all of the advantages of P-fans:

High static pressure for increased cooling performance
Broad rpm range
Lower power consumption
Less vibration
PWM for synchronous fan control

General Specifications
Compatibility
Intel Socket:    1851, 1700, 1200, 115X
AMD Socket:    AM5, AM4, AM3(+)
Ram Clearance:    unlimited
Warranty:    6 Years
Operating Ambient Temperature:    0—40 °C
Heatsink
Heatpipes:    2
Fin Material:    Aluminum
Number of Fins:    44
Fin Thickness:    0.4 mm
Thermal Paste:    MX-4 pre-applied
Fan
Fan Size:    100
Fan Speed:    300—2000 rpm
Fan Bearing:    Fluid Dynamic Bearing
Noise Level:    0.3 Sone
Current:    0.07  A
Connector:    4-Pin
Size & Weight
Length:    74.3 mm
Width:    110.5 mm
Height:    132.5 mm
Weight:    425gr



Ispravno i testirano. Pogledajte slike sa njih se sve vidi.

Mogucnost dogovora oko licnog preuzimanja u Novom Sadu.  
Ako vas nesto zanima posaljite poruku.. Kada sam na poslu ne mogu koristiti telefon, javicu se kad budem bio slobodan. Pakete saljem postexpresom.