EAN/UPC: Ostalo
Proizvođač: AKai
Tip: Risiver

Model Akai AA-1030 - ovo je još jedna moćna mašina! Extra stanje, original crveni Toshibe, šeširić tranzistori!

Najmanje 30 Wati po kanalu RMS pri 8 Om u rasponu od 20 do 20 000 Hz, sa ne više od 0,3% THD. Fino izbalansiran zamajac omogućava vam da izaberete pravo mesto u opsegu učestanosti, a uz pomoć AFC (automatsko podešavanje frekvencije) ste dobili idealnu postavku FM freq. u centar za prijem bez drifta. Mos fet tranzistor sa niskim nivoom buke i tri faze, kondenzator promenljive frekvencije na prednjem panelu eliminišu distorzije, pružajući jasan termin kao kod emitovanja. Keramički filteri u sekciji FM IF poboljšavaju prijem slabih signala. Osetljivost IHF iznosi 2,0 mkv. Šema phase lock loop pruža punu stabilnost sa podelom više od 40 db.

Kao i u AA-1020, u AA-1030 takođe, postoje i promenljive priglušnice za zvuk. FM, vam omogućava da izaberete ne samo najjače i najviše slabe stanice, koji može da uhvati tjuner, ali i bilo usputnih stanica. Takođe ima regulator nivoa, koji omogućava da onemogućite lokalne buku radio prijema. Ima poseban moćan bas i VISOKE tonove; prekidač zvuka; filteri visoke i niske frekvencije, a Tape monitor 1 ima paralelni interni DIN, dva kompleta konektora za povezivanje zvučnika; konektori aux; povezivanje dva para zvučnika; konektori za antenu FM i AM i prekidač udaljenosti / lokalizacije.

Pogledati video na adresi: https: //vimeo. com/929108858 (i prilikom copy/paste adrese,
obavezno, obrisati prazno polje, između vimeo. com)!

Specifications:
Amplifier Section
Continuous Power Output:
30 watts per channel , min. RMS, at 8 ohms from 20 Hz to 20 kHz, with no more than 0,3% T. H. D.
2 x 40 watts into 8 Ω at 1 kHz, with no more than 0,3% T. H. D. both channel driven
2 x 50 watts into 4 Ω at 1 kHz, with no more than 0,3% T. H. D. both channel driven
Power Bandwidth (IHF) : 10 Hz to 60,000 Hz / 8 Ω (Distortion within 0,3%)
Input Sensitivity/Impedance
Phono 1, 2 : 3 mV/50 k Ω
Tape 1, 2 : 150 mV/80 k Ω
Aux : 150 mV/80 k Ω
Signal-to-Noise Ratio (IHF)
Phono : better than 80 dB
Aux : better than 90 dB
Channel Separation (IHF):
Phono : better than 55 dB (at 1 kHz)
Equalizer Phono : RIAA ±1 dB
Tone Controls
Bass : ±10 dB at 100 Hz
Trebble : ±10 dB at 10 kHz
Loudness Contour: +10 dB at 100 Hz; +6 dB at 10 kHz (Volume control set at -30 dB position)
Filter:
High : -8 dB at 10 kHz
Low : -8 dB at 50 Hz
FM Tuner Section
Frequency Range: 88 MHz - 108 MHz
Sensitivity (IHF): 1,9 µ V
Capture Ratio (IHF): 1,5 dB
Selectivity (IHF): better than 70 dB at 98 MHz
Signal-to-Noise Ratio : better than 70 dB
Image Rejection: better than 65 dB at 98 MHz
IF Rejection: better than 90 dB at 98 MHz
Spurious Rejection: better than 70 dB at 98 MHz
Harmonic Distortion
Mono : less than 0,2%
Stereo : less than 0,4%
FM Stereo Separation: better than 40 dB ( at 1 kHz)
FM Muting: Variable (2 µ V to 100 µ V) On-Off
Antenna Input: 300 Ω (balanced), 75 Ω (unbalanced)
AM Tuner Section
Frequency Range: 535 kHz to 1605 kHz
Sensitivity (IHF): 200 µ V/m (Bar antenna); 5 µ V (ext. Antenna)
Image Rejection: better than 55 dB at 1 kHz
IF Rejection: better than 45 dB at 1 kHz
Selectivity (IHF): better than 30 dB at 1 kHz
AM Distortion: less than 0,6%
Signal-to-Noise Ratio: better than 50 dB
General Section
Semiconductors: 1 FET, 33 Transitors; 15 Diodes; 3 ICs
Power Requirements: 120 V, 220 V, 240 V 50/60 Hz
Dimensions (W x H x D): 440 x 140 x 350 mm (17,3` x 5,5` x 13,8`)
Weight: 13 kg !