Proizvedeno u : Aziji
Vrsta: Analogni
Proizvođač: Carrier

CARRIER TFC-A1 Type A - zidni FanCoil termostat,
polovan, skinut sa objekta u rekonstrukciji,
dobijete 3 dana za probu ispravnosti obeleženog termostata,
opis sa net-a :

` Fan operation – With the fan speed selector, fan mode can be set either manually or automatically. In the manual mode it is possible to select three fan speeds (low/medium/high) according to personal preference. In the auto mode fan speed is regulated by a microprocessor in the control, based to the temperature chosen.
Temperature selector – This is designed to maintain the temperature at the desired level. The reference value at the centre of the range is 20°C. By turning the knob towards the symbol (-) the temperature is reduced from the original setting (minimum value is 10°C). By turning the knob towards the symbol (+), the temperature is raised from the original setting (maximum value is 30°C).
Energy saving mode – This function is especially useful when air conditioning at night or in rooms where the user is likely to be absent for a longer period of time. In this case, pushing the button raises the temperature during cooling by 4°C and lowers it during heating by 4°C.
Seasonal changeover
Manual – Selection of heating/cooling is done manually by pushing the button on the control.

Centralised (only for type A control) – Centralised seasonal changeover is possible in two ways:

by a switch located on the central control panel that allows heating/cooling mode changeover (to be provided by the installer).
by a temperature sensor located in contact with the entering water pipe – Automatic, based on air temperature (only for type B control) – The automatic seasonal changeover allows automatic switching of the fan coil operating mode to cooling or heating, depending on the temperature set by the user and on the room temperature.



External contact – The control has a 230 V input that can be used as window contact or presence detector. When such a signal is activated (presence of line voltage on the terminal block contact) the control is set to OFF mode. As a consequence, all outputs (fan, valves etc.) are disconnected, and only frost protection is active, if switched ON by the appropriate dip-switch.
Frost-protection – This function keeps the temperature`,

uputstvo i šemu povezivanja sami skidate sa net-a,
stanje kao na slikama ... cena je po komadu.

Lično preuzimanje : KOD MENE KUĆI u BG na Senjaku !
Slanje : Post Express-om o trošku kupca !

***** Pogledajte i ostalu moju prodaju na Kupindu, možda nađete nešto interesantno :

http://www.kupindo.com/Clan/nin2/SpisakPredmeta