Proizvedeno u : Aziji

Senzor pritiska od 300 Psi (2MPa, 20.7 bara), namenjen za merenje pritiska: ulja, gasa, vode ili nafte i pretvaranje pritiska u električni signal za dalje korištenje u automatici.

Tehničke karakteristike:
- Ulaz: 0-300 Psi (20,7 bara)
- Izlaz: 0,5-4,5 V i to: 0Psi 0,5V; 150Psi 2,5V; 300Psi 4,5V
- Tačnost merenja: ±2%
- Vreme odziva: < 2 msec
- Radna struja: 10 mA
- Navoj: 1/8` NPT (9,7mm) dužine 12mm
- Ključ za montažu: 22 mm
- Radna temperatura: 0° C do +85° C
- Zaštita: IP67
- Kabel: 190 mm
- Merenje nekorzivnih gasova i tečnosti

Povezivanje:
- Crvena: +5V
- Crna: Uzemljenje
- Zelena: Izlazni signal

Input: 0-300 psi
Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V
Accuracy: +/-0.5%FS
Thread: 1/8` NPT
Wiring: Red: +5V; Black: ground; Green: signal output
Overload Capacity: 2-4 times of rated pressure
Working Temperature: -40~+120℃
Compensation Temperature: 0℃~+80℃
Protection Class: IP67
Pressure Medium: Oil, gas and water which is compatible with 316L stainless steel
Load Resistance: ≤ (supply power-6.5V/0.02A)Ω
Long-term stability: Less than 0.1%FS/year
Temperature Effect on Zero: Typical: 0.02%FS/℃; Maximum: 0.05%FS/℃
Temperature Effect on Sensitivity: Typical:0.02%FS/℃; Maximum:0.05%FS/℃
Shock Resistance: 1000g
Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50051-1.