Proizvedeno u : Aziji

Modul predvidjen za pravljenje stabilisanog ispravljaca sa naponom od 0-32V i strujom od 0-5A.

Ulazni napon je u granicama od 6V do 32V i mora da bude 1V visi od maksimalnog zeljenog izlaznog napona.
Sve funkcije se podesavaju pomocu tastera i dugmeta rotacionog enkodera a svi parametri se vide na LCD displeju.
Moja preporuka je da ulazni napon bude do 30V kada bi izlazni bio 28-29V a da snaga ne predje 100ak wati.
U slucaju punjenja baterija potrebno je na izlaz staviti diodu posto nema zastitu od povratnog napona.
Na zadnju stranu moze da se montira i mali ventilator zbog odvodjenja viska toplote.

Na poslednjoj slici se vidi primer montaze, ubacio sam ga u kuciste od starog ispravljaca zajedno sa torusnim transformatorom od 100W i radi savrseno. :)

Description:
Input Voltage: DC 6V-32V
Output Voltage: DC 0-32V (continuously adjustable)
Max. Output Current: 5A(Adjustable)
Max. Efficiency: 95%
Max. Power: 160W( recommended to be used in 120W)
Operating Temperature: -10℃ to +75℃
Resolution: 0.01V(Voltage), 0.01A(Current)
Short Circuit Protection: Yes
Reverse Input Protection: Yes
Output Backflow Protection: No, add a diode if use for charging
Size: 79x42x46mm/3.11x1.65x1.81`

Features:
* This is a DC-DC step down converter power supply that converts 6V-32V to 0-32V.
* High precision LCD display design, make you can convenient to read voltage and current.
* Large 160W maximum power, meet you need, but we suggest work within 120W, reduce power when thevoltage difference is large.
* High conversion rate, can up to 95%.
* Please pay attention to power tube temperature, and enhance heat dissipation(it has fan terminal) if it is over 60℃, there is a reserved fan installation position and terminal, but the terminal is special, not easy to install, if you want to leave out these troubles, you can contact us to buy the type with fan .
* Only be used as a step down converter, and input voltage should be >1V higher than output.