Cena: |
14.900 din
(Predmet je prodat)
|
Stanje: | Polovan bez oštećenja |
Garancija: | Radna garancija pri ličnom preuzimanju |
Isporuka: | Post Express |
Plaćanje: | Tekući račun (pre slanja) |
Grad: |
Beograd-Pinosava, Beograd-Voždovac |
_D013
_________________________________________________________________________
Svi moji predmeti na Kupindu > > > http://www.kupindo.com/Clan/novicvrle/SpisakPredmeta
Sve moje aukcije na Limundu > > > http://www.limundo.com/Clan/novicvrle/SpisakAukcija
_________________________________________________________________________
Conrad Bench PSU (adjustable voltage) VOLTCRAFT PPS-11810 1 - 18 Vdc 0 - 10 A 180 W USB , Remote programmable No. of outputs 2
Conrad Item no.: 513910
Testirano i ispravno !
Aktuelna maloprodajna cena u katalogu je 220Eur (oko 26.500din), neračunajući dodatne troškove (transport, carina, provizija, ... )!
Profesionalno programabilno laboratorijsko stono digitalno napajanje 0-18V 0-10A
# Specifikacije sa sajta proizvodjača:
Highlights & details
Programmable via USB and software provided
3 user-definable presets
Outputs: 2 x (front and rear)
Max power: 180W
Voltage setting range(s): 1 - 18Vdc
Current setting range(s): 0 - 10A
PSU Technology: Switched Mode
Type: Bench
Description
This 180W programmable DC power supply from the Voltcraft PPS series serves as a potential free DC-voltage source for the operation of low voltage consumers. The adjustable output can be adjusted on the front to max. 5 A, the full rated current can be achieved using the power supply`s rear output. The connection is made at the front side via 4 mm safety banana jacks, at the back side via high-current screw terminal sockets. Voltage and current can be set continuously (i.e. not in steps) via the digital control dials with coarse and fine adjustment, in order to enable a fast and precise setting. The values are displayed on a concise LC display. The current limit for constant current operation without short circuits can be preset.
3 freely programmable memory locations, with different fixed voltages and current limits can be used. In addition, the laboratory power supply can be completely remotely controlled via its USB connection. The software for this power supply is provided on CD or is downloadable from the Conrad website.
Features
USB connection for remote operation
3 user-definable presets (Preset) for U und I
Voltage, current and output on/off can be remote controlled
Digital double function adjustment control for rough and detailed control
Protection from over loading
Temperature regulated unit fans.
Technical data
Type PPS-11810
No. of outputs 2 x
Power 180 W
Technology SMPSU
Interfaces USB, Remote
Features programmable
Weight 2.4 kg
Mains control