pregleda

Digitalni termoregulator


Cena:
3.300 din
Stanje: Nekorišćen
Garancija: Ne
Isporuka: AKS
Lično preuzimanje
Plaćanje: Plaćanje pouzećem
Lično
Grad: Niš-Pantelej,
Niš-Pantelej
Prodavac

EAN/UPC: Ostalo

LED sijalica, LED sijalice, LED rasveta, LED paneli, LED trake, LED modul, LED kontroleri, LED oprema, LED cevi, LED napajanja, LED neonke, LED neonka, LED reflektori, LED reflektor, LED ulična rasveta, LED lampe i znakovi, LED industrijska rasveta, LED neon flex, LED crevo, LED nadgradna rasveta, LED ugradna rasveta. . .

ŠIFRA: 2699

Specifications:
Model: XH-W1304
Input Supply: 12V DC
Temperature Range: -50 ℃ to 110 ℃
Precision: 0.1 ℃
NTC: NTC10K-3950 Waterproof Probe
Environmental requirements: -10~60 ℃
Humidity: 20%~85%
Size: 78 x 49 x 27 mm

Indicator and fault code description
MH: Yellow heating mode indicator
If C: (blue) Cooling mode indicator
OUT: (red) Output indicator
TIME: (green) Time control indicator
LLLL: No sensor connected or sensor faulty
HHHH: The measuring range is exceeded or the sensor is faulty
Temperature flashing: the current state is set or in high and low temperature alarm
Detailed function
PO, open when the control mode: turn on this function panel TIME indicator light, then the temperature output can only
For the set time, refer to P3 P4
P1 P2, set the start and stop temperature:
Low temperature start to heating mode (P1 < P2) MH light
High-temperature start for the cooling mode (P1> P2) MC lights
P3 P4, set the temperature control period, this function must be set to ON PO to take effect
P5 P6, set the alternate display dwell time, which is the temperature and current time to switch back and forth time, single
Bit for seconds, can also turn off one of the display, only to retain the time or temperature display.
P7 P8, high and low temperature alarm settings: When the temperature reaches the set temperature screen flashes, buzzer, etc.
P9, temperature correction: when the measured temperature and the actual temperature can be offset by this function correction, correction
After the value of two real-time temperature + temperature correction value
P10, adjust the current time
P11, time difference correction: a fixed addition and subtraction of a few seconds per day to solve the clock error
Case Description
Heating mode 06: 30-21: 00 turn on heating, and the temperature is higher than 60℃ to stop, less than 50℃ start heating
PO = ON Turns on
P1 = 50 Set the start temperature to 50 ℃
P2 = 60 Set the heating to 60℃ to stop
P3 = 06: 30 Set the start time
P4 = 21: 00 Set the off time
2. Cooling mode does not open when the control, the need to control the temperature of all the young, when the temperature is higher than 50℃ to open the fan, cooling to 45℃ to stop
PO = OFF is not open when the control, in the all-day temperature control state
P1 = 50 Set the starting temperature to 50℃
P2 = 45 Set the temperature to 45 ℃ to stop

POŠTARINA IDE NA TERET KUPCA, SLANJE POSLE UPLATE POST NET UPUTNICOM, LIČNO PREUZIMANJE U Nisu, LOKACIJA PO DOGOVORU.
U SLUČAJU SLANJA POUZEĆEM AKS UZIMA 70 DINARA ZA POVRAT NOVCA (ZA NEUPUĆENE). TO SE DODAJE NA SUMU ZA OTKUP, ČISTO DA NE BUDE ZABUNE.KOD OSTALIH KURIRSKIH SLUZBI TO NE VAZI.

PLACANJE POUZECEM
PLACANJE PRE SLANJA
LICNO

Predmet: 41196391