pregleda besplatna dostava

MICRO USB 5V 4-Channel Relay Module USB Control Relay


2.399 din
Cena:
1.679 din
Želi ovaj predmet: 5
Stanje: Nekorišćen
Garancija: Ne
Isporuka: City Express
Pošta
Post Express
Lično preuzimanje
Plaćanje: Ostalo (pre slanja)
Pouzećem
Lično
Grad: Aleksandrovac,
Aleksandrovac
Prodavac

razarac86 (153)

100% pozitivnih ocena

Pozitivne: 171

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Konektori: Ostalo
Tip: Externi
Povezivanje: USB

Relejna ploca sa 4 nezavisna izvoda koju kontrolisete preko USB porta i racunara na kome je instaliran program za upravljanje. Upravljajte sa 4 nezavisna uredjaja preko racunara.
MICRO USB 5V 4-Channel Relay Module USB Control Relay
Features
1.The module have MICRO USB and serial port , so they can communicate with PC and other device conveniently.
2.The normal working voltage for modules is 5V
Usage method:
USB usage method
Module connect with PC through USB
1.Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.



Serial port usage method
Module can communicate with other device directly through serial port .
Module can receive single byte from upper monitor ( baud rate 9600):



Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after receive “0x51” . Then every data byte will control the relay directly . Each bit controls a realy ( ‘0` mark start , ‘1` mark stop )

Besplatno slanje vazi za slanje Postom u obicnom pismu bez pracenja uz prethodnu uplatu na racun koji cu Vam poslati. Vazi samo za predmete na kojima je navedeno da je dostava besplatna.

Predmet: 33500021
Relejna ploca sa 4 nezavisna izvoda koju kontrolisete preko USB porta i racunara na kome je instaliran program za upravljanje. Upravljajte sa 4 nezavisna uredjaja preko racunara.
MICRO USB 5V 4-Channel Relay Module USB Control Relay
Features
1.The module have MICRO USB and serial port , so they can communicate with PC and other device conveniently.
2.The normal working voltage for modules is 5V
Usage method:
USB usage method
Module connect with PC through USB
1.Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.



Serial port usage method
Module can communicate with other device directly through serial port .
Module can receive single byte from upper monitor ( baud rate 9600):



Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after receive “0x51” . Then every data byte will control the relay directly . Each bit controls a realy ( ‘0` mark start , ‘1` mark stop )
33500021 MICRO USB 5V 4-Channel Relay Module USB Control Relay

LimundoGrad koristi kolačiće u statističke i marketinške svrhe. Nastavkom korišćenja sajta smatramo da ste pristali na upotrebu kolačića. Više informacija.