pregleda

♦ Bluetooth modul za mikrokontrolere HC-06 ♦


Cena:
600 din
Želi ovaj predmet: 15
Stanje: Nekorišćen
Garancija: Ne
Isporuka: Pošta
Post Express
Lično preuzimanje
Plaćanje: Tekući račun (pre slanja)
Lično
Grad: Beograd-Sremčica,
Beograd-Čukarica
Prodavac

kraguljac (2583)

PREMIUM član
Član je postao Premium jer:
- ima 100 jedinstvenih pozitivnih ocena od kupaca,
- tokom perioda od 6 meseci uplati minimum 20.000 dinara na svoj Limundo račun.

100% pozitivnih ocena

Pozitivne: 5659

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Konektori: Bluetooth
Tip: Externi
Povezivanje: Ostalo

Bluetooth modul za povezivanje sa mikrokontrolerima , arduino ili drugim razvojnim sistemima.
Moze za sluzi za povezivanje sa racunarima i periferijama, GPS prijemnicima, industrijskim kontrrolama...

U pitanju je slave modul koji se povezuje sa BT transceiverima koji rade u master modu. Default serijska komunikacija je 9600.1 a kod za uparivanje je 1234.

Features:

1) Wireless serial bluetooth port.

2) With free power adapter bottom board come with well power regulator.

User can connect 3.3 to 5VDC and connect TX and RX to your control IO (general 3.3 to 5V digital input output of MCU or arduino IO is ok, or general TLL IO)

3) Easy to connect this module with PC, just search and key `1234` passcode.

4) With white SMD LED on the adapter board, can see the Bluetooth connection status.



Step to connect:

1) Connect the wiring, power up, while the device is not connected, the bluetooth module board has a white LED flashing

2) At PC side, search bluetooth device.

3) Found name called `LINVOR` device

4) Connect it, and passcode is `1234`

5) While connection is ok, you can see the LED become always on.

6) Enjoy



Basically, user can only use 2 to 5 pin in most of the application



PIN NAME FUNCTION
1 KEY For configuration use (normally not connected)
2 VCC 3.3 to 5V input
3 GND Ground
4 TXD TX transmit pin
5 RXD RX receive pin
6 STATE Connection status



Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it

simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.

Computer and peripheral devices
GPS receiver
Industrial control

MCU projects
Default serail port setting : 9600, N, 8, 1

Pairing code : 1234
Running in slave role: Pair with BT dongle and master module

Usage
Coupled Mode: Two modules will establish communication automatically when powered.
PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.

Bluetooth protocal : Bluetooth Specification v2.0+EDR
Frequency : 2.4GHz ISM band
Modulation : GFSK(Gaussian Frequency Shift Keying)
Emission power :

Zbog obostrane sigurnosti sva komunikacija se obavlja preko kupinda.
U slucaju takvog dogovora pouzecem saljem iskljucivo postexpresom.

Ako dodje do bilo kakvog problema kontaktirajte me i resicemo ga.

Pogledajte moje ostale aukcije:
http://www.limundo.com/Clan/kraguljac/SpisakAukcija
http://www.kupindo.com/Clan/kraguljac/SpisakPredmeta

Predmet: 11751525

LimundoGrad d.o.o. koristi kolačiće koji su potrebni za pružanje usluga u svrhu statistike, sigurnosti, kao i utvrđivanja interesovanja korisnika i može ih deliti sa trećim licima u svrhu analize i marketinga. Više informacija.