Tip: seriski rs232

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE!
SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE!
MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU!

EasySYNC Premium USB to Serial RS232 adapter kabl NOVO!

Model: ES-U-1001-R100
Connective Peripherals ESU1001R100

Kabal / konverter USB A tip kabla na serijski RS-232 9 pina kabli sa pozlacenim konektorima na obe strane namenjen za firme, industrijsku ili kucnu upotrebu.

Radi na svim 32 ili 64 bitnim Windows, MAC i Linux operativnim sistemima po specifikaciji proizvodjaca.

Dolazi u kompletu sa instalacionim CD-om na kome su drajveri a moguce j i skinuti najnovije sa sajta.

Potpuno ispravno.

Radna garancija 30 dana.

Opis:
The USB to RS232 converter cable family provides a simple way to connect devices with an RS232 interface to USB. The cables are wire-ended and include an additional power output. Available in a range of lengths and power output voltages.

ES-U-1001-R100 is a 1m premium USB to RS232 adapter cable with serial port speed of up to 1 Mbps. This bus powered USB cable has side-lit blue RX and TX traffic indicators. For additional connection reliability, both the USB connector and DB9 serial connector are gold plated. The ES-U-1001-R100 features an integrated electronic assembly using FTDI`s FT232R IC and level shifters, to provide an easy-to-use USB conversion. The cable terminates with an industry standard DE-9P (DB9) male.

Download Virtual COM Port (VCP) Drivers for Windows, Mac OS and Linux

Karakteristike:
ES-U-1001-R100 I US232R-100 Installation Guide
The enclosed CD contains drivers for the following operating systems
• Windows 98, ME, 2000, Server 2003 and XP
• MAC-OS8, OS9, OSX ( Power PC CPU ) , MAC-OSX ( Intel CPU )
• Windows CE Version 4 ( ARM &x86 CPU )
Windows 2000 / Server 2003 / Windows XP installation
Insert the driver CD before connecting the adapter to USB. After a short delay a menu will appear. Click on the `Install Drivers` button to automatically install the drivers. Connect the adapter to a USB port on the host PC.
Windows 98 I Windows ME installation
Insert the driver CD before connecting the adapter to USB. After a short delay a menu will appear. Click on the `Install Drivers` button to display the folder on the CD that contains the Windows 98/ME drivers. Connect the adapter to a USB port on the host PC. When the Add New Hardware Wizard launches, direct it to the folder as displayed.
MAC-OS Installation
Please refer to the Installation Guides folder on the CD for instructions.
Windows CE Installation
Please refer to the Installation Guides folder on the CD for instructions.
Linux Installation
Linux Kernel Version 4.20 and higher already support this adapter. No installation is required - just plug the adapter into a USB port on the host PC.
For other O. S. and latest driver releases visit ftdichip. com/Drivers/VCP. htm
ES-U-1001-R100 / US232R-100 Specification
• Data transfer rates from 300 baud to IM baud.
• Internal 128 byte TX buffer I 384 byte RX buffer
• Full Modem Control signal support
• Hardware assisted RTS/CTS, DSR/DTR and X-ON/X-OFF handshaking options
• USB1.1 and USB2.0 Host controller compliant.
• No IRQ I DMA resources required
• Remote Wakeup capable
Powered from USB - no external PSU required
• Gold Plated USB and DB9 connectors for enhanced connectivity
• Blue Side Light Transmit / Receive indicator LEDS
• Integral 100cm USB cable
• Uses FTDI`s 4th Generation FT232R USB UART bridge i. c
• Windows 98/ME / 2000 I XP driver support
• Mac OS8 / OS9 I OSX / Intel driver support
• Windows CE driver support
• Linux driver support in versions 4.20 and above.