Proizvedeno u : Aziji

Ovaj kontroler je namenjen da se preko weba upravlja sa relejskim pločama. Podržava modue do 16 relea. Koristi napajanje od 5V 2A. Molim Vas da koristite napajanje od 2A jer Inače neće moći da drži sve rele uključeno.

Tehničke karakteristike:

1. Set IP in Internet Attribute
2. Default IP 192.168.1.4 Port:30000
Open Browser and input .Enter the control interface
3. Relay control HTTP Command:
Relay 1-8Bit Command:
: Relay-01 OFF
: Relay-01 ON
: Relay-02 OFF
: Relay-02 ON
: Relay-03 OFF
: Relay-03 ON
: Relay-04 OFF
: Relay-04 ON
: Relay-05 OFF
: Relay-05 ON
: Relay-06 OFF
: Relay-06 ON
: Relay-07 OFF
: Relay-07 ON
: Relay-08 OFF
: Relay-08 ON
: Feedback current I/O status by 16 ACSII . MSB is for the first bit.and LSB for 16th bit.
E.g : Return 1111000011110000 It is means Relay 1-4 is ON,Relay 5-8 is OFF,Relay 9-12 is ON,Relay 13-16 is OFF.
Modify IP
: When modify IP,the Relay-01 must not be 0, Relay-01~04 all can not be greater than 255.Port can not be 0.
Restore Default
LED will flash once when short press button.
Long press button and don`t release until LED lit aways.Then release button ,the led will off.It said it is to restore the factory settings. IP 192.168.1.4 and Port 30000

Šifra: H1029