Proizvedeno u : Aziji

Komandovanje 8 relea preko mreže

Modul za komandovanje na daljinu, pametne kuće , smart house.

Pristupi se modulu iz browsera preko mreze i pale se i gase pojedinačni izlazi.

Karakteristike:
- Napajanje: 5 V DC
- Struja: 2 A max
- Hladnjak u kompletu
- Maksimalna snaga: 6 W

Product Introduction

8-channel network module is a network-based relay control module 32 of the system, through this module to the router via the Internet or internal network control relay module, enabling remote control of electrical switches enable power centralized management purposes. It can be set directly through the IE browser and control, use please refer to the instructions.

Suitable for: home decoration, hotels, shopping malls factories, cafes, karaoke oK timer management, daily office, entity shop monitoring, physical networking, industrial control equipment, testing equipment power control, unattended, underground pipelines, mining equipment, ships, stations room, street management, intelligent management and centralized management.

NOTES:
When access to high-voltage power supply modules, please note the wiring to prevent equipment damage caused by short circuit.

How to use
1. Set IP
2. Default IP: 192.168.1.4 Port: 30000
Open your browser address bar: http: //192.168.1.4/30000 enter the control interface
3, relay control HTTP commands:

Relays 1-8 command:
http: // ip / port / 00: Relay-01 OFF
http: // ip / port / 01: Relay-01 ON
http: // ip / port / 02: Relay-02 OFF
http: // ip / port / 03: Relay-02 ON
http: // ip / port / 04: Relay-03 OFF
http: // ip / port / 05: Relay-03 ON
http: // ip / port / 06: Relay-04 OFF
http: // ip / port / 07: Relay-04 ON
http: // ip / port / 08: Relay-05 OFF
http: // ip / port / 09: Relay-05 ON
http: // ip / port / 10: Relay-06 OFF
http: // ip / port / 11: Relay-06 ON
http: // ip / port / 12: Relay-07 OFF
http: // ip / port / 13: Relay-07 ON
http: // ip / port / 14: Relay-08 OFF
http: // ip / port / 15: Relay-08 ON

Relay 9-10 road command:
http: // ip / port / 16: Relay-09 OFF
http: // ip / port / 17: Relay-09 ON
http: // ip / port / 18: Relay-10 OFF
http: // ip / port / 19: Relay-10 ON
http: // ip / port / 20: Relay-11 OFF
http: // ip / port / 21: Relay-11 ON
http: // ip / port / 22: Relay-12 OFF
http: // ip / port / 23: Relay-12 ON
http: // ip / port / 24: Relay-13 OFF
http: // ip / port / 25: Relay-13 ON
http: // ip / port / 26: Relay-14 OFF
http: // ip / port / 27: Relay-14 ON
http: // ip / port / 28: Relay-15 OFF
http: // ip / port / 29: Relay-15 ON
http: // ip / port / 30: Relay-16 OFF
http: // ip / port / 31: Relay-16 ON
4, relay status query command:
http: // ip / port / 99: IO status feedback current feedback 16 ACSII correspond relatively IO; the highest bit of the first path, the least significant bit to 16.
For example: 1,111,000,011,110,000 Back Relay1 ~ 4 switch state is ON, Relay5 ~ 8 is OFF, Relay9 ~ 12 is ON, Relay13 ~ 16 is OFF
5, modify the IP:
http: // ip / port / 41: Changing the IP and port number of the page; when you change the IP and port number, IP1 must not be 0, IP1-IP4 whole is not greater than 255; port can not be 0; to change a success.
6, restore factory:

Press the reset switch, LED will flash a warning about,

Press the reset switch and hold until the LED lights president, release the button, after a while lamp is off, the factory settings are restored, the factory IP is: 192.168.1.4 port: 30000