pregleda

♦ Kontroler temperature i vlaznosti vazduha SHT2000 ♦


Cena:
2.900 din
Želi ovaj predmet: 1
Stanje: Nekorišćen
Garancija: Ne
Isporuka: Post Express
Lično preuzimanje
Plaćanje: Tekući račun (pre slanja)
Pouzećem
Lično
Grad: Beograd-Sremčica,
Beograd-Čukarica
Prodavac

kraguljac (2568)

PREMIUM član
Član je postao Premium jer:
- ima 100 jedinstvenih pozitivnih ocena od kupaca,
- tokom perioda od 6 meseci uplati minimum 20.000 dinara na svoj Limundo račun.

100% pozitivnih ocena

Pozitivne: 5606

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Proizvedeno u : Aziji

Regulator temperature i vlaznosti vazduha.
Moze da radi u modu hladjenja i grejanja kao i ovlazivanja i odvlazivanja vazduha, zavisi kako se podesi.
Verzija koja radi na 220V, detaljne karakteristike se vide na jednoj od slika.


Setting method: Start value < stop value (program automatically determines working mode is heating/humidifying mode)
Setting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)
Heating/cooling mode setting
Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.
Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.

Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again
The first step: heating mode, starting temperature < stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 ° C.
Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 ° C with ▲▼ keys, and the setting is completed!
Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.
The first step: cooling mode, starting temperature > stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 ° C.
The third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 ° C by ▲▼, the setting is completed!

Humidification/Dehumidification Mode Settings:
Setting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.

Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:
Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.
Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
Setup steps:
Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.

Zbog obostrane sigurnosti sva komunikacija se obavlja preko kupinda.
U slucaju takvog dogovora pouzecem saljem iskljucivo postexpresom.

Ako dodje do bilo kakvog problema kontaktirajte me i resicemo ga.

Pogledajte moje ostale aukcije:
http://www.limundo.com/Clan/kraguljac/SpisakAukcija
http://www.kupindo.com/Clan/kraguljac/SpisakPredmeta

Predmet: 52802185

LimundoGrad d.o.o. koristi kolačiće koji su potrebni za pružanje usluga u svrhu statistike, sigurnosti, kao i utvrđivanja interesovanja korisnika i može ih deliti sa trećim licima u svrhu analize i marketinga. Više informacija.