|Želi ovaj predmet:||4|
|Plaćanje:||Ostalo (pre slanja)
Proizvedeno u : Evropi
NAJNOVIJI MODEL BOSCH UDARNE BUSILICE
SVE KARAKTERISTIKE SU OPISANE DOLE
MOZE DA RADI I KADA SE ISPRAZNI PRIKLJUCIVANJEM NA ISPRAVLJAC
BUSI RUPE U BETONU I IMA VIBRACIONO BUSENJE
BUSILICA /SRAFILICA AKUMULATORSKA
INDIKACIJA PUNJENJA I PRAZNE BATERIJE
PROBANA PAR DANA
BESPREKORNO FUNKCIONALAN MODEL
SNAGA 30 NM
FUTER 10 MM
+ GRATIS POKLANJAM NEKOLIKO BOSCH ORIGINAL NASTAVAKA U ORIGINAL PAKOVANJU
PSB 1080 LI-2 10.8V
The PSB 10.8 LI-2 is a cordless 2-speed hammer drill/driver.
Screwdriving with torque setting, drilling into wood and steel, hammer drilling into concrete, brick walls
Tool-free changing of screwdriver and drill bits:
The PSB 10.8 LI-2 integrates the keyless chuck feature which means changing screwdriver and drill bits is now easier than ever. When the on/off switch is not pressed, the drill spindle (and thus the chuck) is locked. This enables screws to be screwed in, even when the battery is empty, and allows the machine to be used as a screwdriver.
Optimum power for every type of application:
The PSB 10.8 LI-2 is a truly versatile tool. It features 20 pre-selectable torque settings plus a drill and impact drill setting for optimum power for every application
This tool features a 2-speed, high performance gearbox, which offers best power transfer (high efficiency) and the highest degree of running smoothness with the smallest possible dimensions.
Maximum power and endurance thanks to Bosch Lithium-Ion:
Bosch Lithium-Ion powered tools are always ready to use thanks to no memory effect and no self-discharge. This means that the tool can be charged at any time, regardless of whether the battery is flat or not. To ensure a long lifetime Bosch has equipped all Lithium-Ion batteries with Electronic Cell Protection (ECP), preventing overheating and overload.
Always ready for use:
Even after a period of four months on standby, a fully charged Lithium-Ion battery is still charged to approximately 85 per cent. This means that power is available to you for six times longer than that of conventional NiCd batteries.
The 10.8v battery system is incorporated into the drill handle, so all you need to do, is plug the charger into the handle!
Application: screwdriving / drilling / impact drilling
Integrated work light
Charge level indicator
Forward /reverse indicator
Low battery indication
Battery voltage 10,8 V
Battery capacity 1.5 Ah
No-load speed (1st gear / 2nd gear) 0 – 400 /0 - 1.300 rpm
Max. torque 30,0 Nm
Max. torque for soft/hard screwdriving applications 15 / 30 Nm
Torque settings 20 + 1
Max. impact rate 19.500 bpm
Drill chuck 10-mm keyless chuck
Machine weight 1,00 kg
Drilling diameter in steel 8mm
Drilling diameter in wood 20mm
Drilling diameter in masonry 6mm
Screw Diameter: Screw diameter up to 6mm